PRODUCTS
TOMKAT 2 - Cable and Pipe Locator More >>
Tomkat 2 Locator - front view The TOMKAT 2 Cable Locator is a full function industry standard pipe and cable locator, designed and manufactured by Pact Services.

Better in design, the TOMKAT 2 is rugged, lightweight and packed full of features including a detachable speaker that can be held close to the ear for use in noisy environments.

Fingertip controls allow for adjustment of the sensitivity control and enable rapid switching between the TOMKATS three operating modes.

The TOMKAT 2 is a very effective Cable Locator and is also used for the location of buried pipes and mains to a depth of 3 meters with three location modes for ease of use.
Tomkat 2 Locator - Speaker grill at the top of the locator
Tomkat 2 Locator - Rear view
SIGEN 2 - Signal Generator More >>
Sigen 2 Generator - front view The SIGEN 2 works in conjunction with the TOMKAT 2 Cable Locator.
There are two ways in which the SIGEN 2 operates the first is by applying a signal by induction, the second is by direct connection.

 Sigen 2 Generator - rear view
MCL1 METAL DETECTOR More >>
MCL1 metal detector The M.C.L. 1 is an industry standard metal detector within the construction and utility industries.

The metal detector is user friendly with easy to use controls offering good depth location, rugged reliability and at a fraction of the cost of comparable detectors.





 MCL1 metal detector - controls
ACCESSORIES
SIGNAL CLAMP More >>
Signal Clamp 100mm The Signal Clamp allows the operator to apply a signal directly and safely to an insulted conductor ensuring a good contact without removing the insulation.
SONDE More >>
Sonde - Waterproof transmitter

Used in conjunction with the TOMKAT 2 Cable Locator to trace non-metallic pipes and ducts.

The 33kHz Sonde is a self-contained waterproof transmitter, which is attached to drain rods or any movable device that can be propelled inside non-metallic pipes. Used correctly you can pinpoint the exact route of the pipe and were a blockage is.
FLEXI TRACE 30 METERS More >>
Flexi trace on 30 metre spool and stand Used in conjunction with the TOMKAT 2 Cable Locator and SIGEN 2 to trace non-metallic pipes and ducts.

The Flex-trace is a copper filled fibre glass rod use to trace non-metallic pipes. Used correctly you can trace the exact route of the pipe or duct along its length.
Home | About | Products | Support | Training | Contact us | Site Map